FAQ: What Pressure Are You Supposed To Run A Michelin Commander 2 Tire?

What is the recommended tire pressure for Michelin tires?

A typical passenger car tire, properly inflated to 35 psi ( pounds per square inch ), can lose up to 1 psi per month under normal driving conditions, according to Michelinman.com. Therefore, you should check your tire’s pressure cold, or before you’ve driven for the day, at least once every month.

What is my recommended tire pressure?

Air pressure in tires is measured in pounds per square inch, or PSI; usually, the recommended pressure ranges between 30 and 35 PSI.

What PSI should my Harley tires be?

Springtime: Check Your Tire Pressure! Most Harley -Davidson® motorcycles are equipped with Dunlop® tires; the tire pressures (cold) should be 36psi front and 40psi rear. Also, check your tires for uneven tread wear and any deterioration in the sidewalls and in the tread itself.

Is 60 psi too high for tires?

Most show a max cold pressure range between 35 and 44psi. There are a few that are up to 51psi. I only know of a few truck tires that get up to 60 or 65psi for cold tire pressure.

You might be interested:  Often asked: How Long Can Michelin Mx4 Plus Tires Last?

Is 40 psi too much for tires?

Higher pressure generally is not dangerous, as long as you stay well below the “maximum inflation pressure.” That number is listed on each sidewall, and is much higher than your “recommended tire pressure” of 33 psi, Gary. So, in your case, I’d recommend that you put 35 or 36 psi in the tires and just leave it there.

Is 35 psi too high?

Higher pressure generally is not dangerous, as long as you stay well below the “maximum inflation pressure.” That number is listed on each sidewall, and is much higher than your “recommended tire pressure ” of 33 psi, Gary. So, in your case, I’d recommend that you put 35 or 36 psi in the tires and just leave it there.

Should all 4 tires be the same PSI?

Often, the vehicle manufacturers specify more air pressure in the back for this very reason. (Sometimes, not often, they specify a couple of pounds lower in the rear, but rarely more than 2 psi.) A good rule of thumb would be to keep the same variance front to rear that the vehicle manufacturer recommends.

Is 50 psi too much for tires?

Every tire has a rated maximum inflation pressure. Often it will be found in small print around the rim edge of the sidewall. This means that the tire will safely carry up to 1477 lbs. and can be safely inflated up to 300 kPa (Kilopascal) or 50 psi (pounds per square inch).

Why do dealers overinflate tires?

Tires are overinflated during the shipping process, so as to help prevent the flat spot from forming in the tire as it sits for days on in during the shipping process. It is supposed to be part of the delivery check process that the service department deflates the tires to the proper pressure.

You might be interested:  Question: How Many Michelin Stats Does Ramsay Have?

What is the correct tire pressure for motorcycles?

Pump it up. Proper tire pressure lets your bike roll quickly, ride smoothly, and avoid flats. Narrow tires need more air pressure than wide ones: Road tires typically require 80 to 130 psi ( pounds per square inch ); mountain tires, 25 to 35 psi; and hybrid tires, 40 to 70 psi.

How does tire pressure affect motorcycle handling?

Under-inflated tires can cause a list of safety risks: Decreased handling and riding precision. Poor fuel economy. Poor braking performance.

When should I check motorcycle tire pressure?

You should always check for proper motorcycle tire pressure when the wheels are still cold, or when the bike has been parked for at least three hours. This gives you the most accurate gauge. This is also why most riders check their pressure before they start off in the morning.

Is it bad to overinflate tires?

Both under and, over-inflating a tire can actually be detrimental to the performance of a vehicle and to the life of a tire. Over-inflating tires causes the sidewalls and tread of the tire to become harder than normal. This can reduce the traction and performance of the tire, as well as cause uneven tire wear.

Is 80 psi too high for tires?

The 80 psi is required if the tire is operating at rated load. You most likely have a load range E tire. I have run load range E tires for years on my 4 Runners at 32 psi front and 30 psi rear. This gives me real even tire wear.

You might be interested:  Often asked: What Is Michelin Chef?

What happens if I over inflate my tires?

Overinflated Tires Wear Out Your Tires Faster & Unevenly Uneven tire wear can also be the result of overinflation. When your tires have too much air it causes the center of the tread to bow out and wear first. Because of this you will need new tires more often and have a less than comfortable ride.

Leave a Reply

Your email address will not be published. Required fields are marked *