The Ford 289 4.7 liter Long Block Crate Engine is now available for purchase. The 289 was developed by the Ford Motor Company in 1963 for use in Mustangs, medium-sized automobiles, and Broncos, among other vehicles. This engine was originally built with a 5 bolt bellhousing style, but the manufacturer began utilizing a 6 bolt layout in August of 1964 and continued until the end of 1966.
In April 1963, the 289 cu in (4.7 L) model was also offered to the market. After being increased to 4.00 in (101.6 mm), the bore was adopted as the standard bore for most small block engines. The length of the stroke stayed at 2.87 inches.
Contents
- 1 How much horsepower does a 289 v8 have?
- 2 How many liters is a Ford 302 motor?
- 3 How much horsepower can a Ford 289 handle?
- 4 How much horsepower does a 66 289 have?
- 5 How much is a 289 engine worth?
- 6 How high can a 289 rev?
- 7 How many liters is a Ford 460?
- 8 What liter is a 351 Cleveland?
- 9 How many liters is a 350 engine?
- 10 What is a 289 special?
- 11 How can you tell the difference between a 260 and a 289?
- 12 Are 289 and 302 blocks the same?
- 13 Is the 289 a Windsor?
- 14 What size engine is a 289?
- 15 How much horsepower does a 289 have?
- 16 How to get more horsepower out of a Ford 289?
- 17 What is the difference between a Ford 302, 289?
- 18 What is the oil capacity for a Ford 289 engine?
How much horsepower does a 289 v8 have?
Ford’s 289 High Performance V-8, which was originally debuted in 1963 and first offered as a Mustang option in 1964, is a high-revving, zippy Ford V-8 with a factory rating of 271 horsepower that is available in a variety of configurations.
How many liters is a Ford 302 motor?
Ford Boss 302 engine
| Ford 302 H.O. | |
|---|---|
| Displacement | 302 cu in (4.9 L) |
| Cylinder bore | 4 in (101.6 mm) |
| Piston stroke | 3 in (76.2 mm) |
| Block material | Cast iron |
How much horsepower can a Ford 289 handle?
If you crank an engine hard enough, it will produce horsepower (if it is intended to do so), but it is far from being a reliable street engine. In my opinion, 300-350 horsepower is about the maximum limit for a streetable 289 engine.
How much horsepower does a 66 289 have?
Engine Basics
| Year | 1965-67 “A” Code | “K” Code Shelbys |
|---|---|---|
| Power (hp) | 225 hp @ 4400 RPM | 306 hp @ 6000 RPM |
| Torque (lb/ft) | 305 lb/ft @ 3200 RPM | 329 lb/ft @ 4200 RPM |
| Compression | 10.0:1 | 10.5:1 (65) |
| Displacement | 289 cu / 4.7 liters | 289 cu / 4.7 liters |
How much is a 289 engine worth?
What Is the Value of a 1966 Ford Mustang 289?
| Engines | Median Sale |
|---|---|
| 289 CID | 225 HP | $25,463 |
| 289 CID | 271 HP | $45,000 |
| 200 CID | 120 HP | $11,600 |
| 289 CID | 200 HP | $22,400 |
How high can a 289 rev?
6200 RPM is a safe speed for a 289 in excellent condition.
How many liters is a Ford 460?
Ford 385 engine
| Ford 385 V8 | |
|---|---|
| Production | 1968–1998 |
| Layout | |
| Configuration | Naturally aspirated Big-block V8 |
| Displacement | 370 cu in (6.1 L) 429 cu in (7.0 L) 460 cu in (7.5 L) |
What liter is a 351 Cleveland?
Ford’s 351 Cleveland engine is a small-block 5.8L V8 that was built from 1969 to 1974 and was based on the Ford Falcon. The engine is a member of Ford’s ″335″ engine family, which is a series of V8 engines with 90-degree overhead valves and overhead camshafts. Despite the fact that the 335 engine family remained in production until 1982, the 351C was only manufactured until 1974.
How many liters is a 350 engine?
The Chevy 350 engine is a 350 cubic inch (5.7-liter) small block V8 with a bore and stroke of 4.00 and 3.48 inches. It is powered by a six-speed manual transmission. The horsepower of an automobile varies depending on the year, manufacture, and model of the vehicle. It can range from roughly 145 to more than 370.
What is a 289 special?
Engine from a rare Ford ″289 Special″: This engine is designed to fit into MK1 and MK1A 260 Tigers. This is essentially a 289 dressed in 260 garments. It was only produced for a single year, in 1964. These motors are highly sought after by Tiger enthusiasts as a wonderful alternative to the original 260s due to the fact that they appear to be similar on the outside.
How can you tell the difference between a 260 and a 289?
Both the bellhousing and the engine mounts featured a different bolt pattern than the rest of the vehicle. The bell had a five-bolt arrangement, and the bolt spacing for the motor mounts was six inches apart, while the bolt spacing for the 289 was seven inches apart, respectively. In any case, the 260 had the three freeze plugs on either side, which indicates a later model.
Are 289 and 302 blocks the same?
A 302 is essentially a stroked version of a 289. The block and piston are the same. This was accomplished by shortening the rod from 5.155′ to 5.090′ in order to compensate for the increased stroke.
Is the 289 a Windsor?
Engine Information for the 1967 Mustang – 289 cubic inch V-8 (4.7 L Windsor V8) The 289 Windsor V8 has a displacement of 289 cubic inches. This is Ford’s property.
What size engine is a 289?
Engine Basics
| Year | 1967 “A” Code | 1967 “K” Code Shelby |
|---|---|---|
| Torque (lb/ft) | 305 lb/ft @ 3200 RPM | 329 lb/ft @ 4200 RPM |
| Compression | 10.0:1 | 10.5:1 (65) |
| Displacement | 289 cu / 4.7 liters | 289 cu / 4.7 liters |
| Bore x Stroke | 4.000 x 2.87 | 4.000 x 2.87 |
How much horsepower does a 289 have?
What kind of horsepower can a 289 produce? This pint-sized powerhouse produced 195 and 210 horsepower in basic trim (with a two or four barrel carburetor, depending), as well as 271 horsepower in HiPo (High Performance) trim. It was produced from 1963 to 1968.
How to get more horsepower out of a Ford 289?
- Install a larger air cleaner on top of it. Increase the amount of space it has to draw air through. This is an extremely low-cost option.
- Headers. Replacement of the factory exhaust manifolds with aftermarket headers always results in a 5- to 10-percent increase in horsepower.
- True dual exhaust with an X or H pipe (which you will almost certainly have to install if you decide to go with headers)
What is the difference between a Ford 302, 289?
The 302 has a 1/8th inch longer stroke than the 302, which is the primary difference between the two. This is accomplished by the use of a different crankshaft You should be able to check the engine code and determine if the block is a 302 or a 289 model.
What is the oil capacity for a Ford 289 engine?
The real capacity is 5 quarts after the filter has been changed. There are 4.730368968779565 liters in a gallon of water. Check to check if the dipstick tube has been replaced; they are notoriously difficult to properly install and will result in a low oil reading on the dipstick if not done correctly.