How To Read Michelin Date Codes?

How do you read the date code on a Michelin tire?

Locate the DOT number. On the sidewall of the tire, locate a number that starts with DOT. It can be up to 12 digits long. The last three or four numbers are the date code.

How do you read tire date codes?

The last four digits of this code tell you when your tire was manufactured. The first two numbers indicate what week of the year it was made (out of 52 weeks per year), and the second two numbers represent the year. For example, 5200 would reveal that a tire was manufactured during the 52nd week of the year 2000.

How do you read a DOT code?

The raised numbers of the DOT Code are placed together and often enclosed in a raised oval. The first two numbers are the week the tire was manufactured. In the example below, 35 stands for “week 35.” The second two numbers are the year the tire was manufactured.

How do I tell the age of my tires?

To determine the age of your tires, check the last four digits of the U.S. The U.S. Department of Transportation (DOT) number stamped on the tire’s sidewall contains a date code that identifies the age of your tires.

You might be interested:  Question: How Many Michelin Stars Have Gordon Ramsay?

When did they start putting date codes on tires?

Luckily, decoding a tire and determining the tire’s age is a pretty straightforward process, as a standardized 10-digit Tire Identification Number (often called a DOT number) was mandated by the United States Department of Transportation in 1971.

How many years do tires last on average?

It may be tentative, but tires do have an expiration date. There is a general consensus that most tires should be inspected, if not replaced, at about six years and should be absolutely be swapped out after 10 years, regardless of how much tread they have left. How do you know how old your tires are?

What is the oldest tire you should buy?

though it could have new tread, it is still an old tire. Tire Rack’s recommendation that a tire should be replaced ten years from the date of manufacture or six years from the date it is placed into service applies to spare tires, as well, so if your vehicle is six years old or older, it’s probably…

What is the DOT code on a TYRE?

Each tyre has an imprinted DOT code on the sidewall. DOT stands for the Department of Transportation and the code is made of numbers and letters – they indicate the place and date of the tyre’s manufacture. Read on to find out how to check the tyre’s date and place of manufacture and why the age of a tyre matters.

What is dot on a tire?

The ” DOT ” symbol certifies the tire manufacturer’s compliance with the U.S. Department of Transportation ( DOT ) National Highway Traffic Safety Administration (NHTSA) tire safety standards. Tires made in the United States have the DOT serial number located on the inside sidewall near the rim.

You might be interested:  Question: What Should I Inflate Michelin 235/45 Zr18 To?

What is a DOT code for jobs?

The coding structure of the DOT is specifically designed to facilitate this process. The unique 9-digit code shown for each occupation allows job interviewers to perform file searches providing the linkage between an applicant’s work experience and employer job orders.

Do tires go bad if not used?

If not used, tires last for 6-10 years, depending on the storage and environmental conditions. Overall, the time limits for stored tires are much the same as for tires that are being used.

Leave a Reply

Your email address will not be published. Required fields are marked *