Question: What Is The Inflation Recomendation For The Michelin Defender Ltx M/s?

What is the recommended tire pressure for Michelin tires?

A typical passenger car tire, properly inflated to 35 psi ( pounds per square inch ), can lose up to 1 psi per month under normal driving conditions, according to Michelinman.com. Therefore, you should check your tire’s pressure cold, or before you’ve driven for the day, at least once every month.

What is the proper tire inflation?

Air pressure in tires is measured in pounds per square inch, or PSI; usually, the recommended pressure ranges between 30 and 35 PSI. To learn what your tire pressure should be, look for your manufacturer’s recommendation, which is printed on a label inside your car.

How many miles do Michelin Defender tires last?

Michelin rates the Defender for tire wear at 90,000 miles. They say the tire delivers this type of mileage because of the way their trademarked MaxTouch Construction combines with the interlocking action of their Breakthrough IntelliSipe technology to provide “exceptional tread block rigidity” and extra-long life.

You might be interested:  FAQ: How Match Tires Michelin For F 150?

What is the recommended tire pressure for LT tires?

The lowest PSI that the TRA recommends for LT tires is 35 PSI. That 35 will support a certain load, but even if you don’t need to support that much of a load, it is still recommended to run 35 PSI.

Is 40 psi too much for tires?

Higher pressure generally is not dangerous, as long as you stay well below the “maximum inflation pressure.” That number is listed on each sidewall, and is much higher than your “recommended tire pressure” of 33 psi, Gary. So, in your case, I’d recommend that you put 35 or 36 psi in the tires and just leave it there.

Is 35 psi too high?

Higher pressure generally is not dangerous, as long as you stay well below the “maximum inflation pressure.” That number is listed on each sidewall, and is much higher than your “recommended tire pressure ” of 33 psi, Gary. So, in your case, I’d recommend that you put 35 or 36 psi in the tires and just leave it there.

Is 50 psi too much for tires?

Every tire has a rated maximum inflation pressure. Often it will be found in small print around the rim edge of the sidewall. This means that the tire will safely carry up to 1477 lbs. and can be safely inflated up to 300 kPa (Kilopascal) or 50 psi (pounds per square inch).

At what PSI will a tire explode?

The standard tire is inflated to about 30 to 35 pounds per square inch. Under hot weather and highway conditions, the temperature of the air inside the tire rises about 50 degrees. That increases the pressure inside the tire about 5 psi. The burst pressure of a tire is about 200 psi.

You might be interested:  When Will Chicago Michelin Stars Be Announced?

Is 80 psi too high for tires?

The 80 psi is required if the tire is operating at rated load. You most likely have a load range E tire. I have run load range E tires for years on my 4 Runners at 32 psi front and 30 psi rear. This gives me real even tire wear.

Are Michelin defenders worth it?

Michelin stands behind the Defender with a 90,000 mile tread warranty. The Defender has a number of good points including a very quiet ride quality to go along with impressive dry and wet traction. Overall, Michelin has a very good all-season tire in the Defender, although there is room for improvement.

Are Michelin Defender LTX tires quiet?

The Defender LTX M/S is designed to combine a smooth, quiet ride with year-round traction in dry, wet and wintry conditions, even in light snow. Defender LTX M/S tires feature Michelin Evertread compound, which is a stronger advanced compound that holds up to tougher conditions longer.

Is Michelin Defender a quiet tire?

6 – Michelin Defender As a new tire in 2012, the Michelin Defender is making its mark as an all-around high performing all-season tire. One very nice benefit you’ll also find with this tire is how quiet the ride is. Michelin has tuned the tread pattern to optimize ride comfort and quietness.

Should all 4 tires be the same PSI?

Often, the vehicle manufacturers specify more air pressure in the back for this very reason. (Sometimes, not often, they specify a couple of pounds lower in the rear, but rarely more than 2 psi.) A good rule of thumb would be to keep the same variance front to rear that the vehicle manufacturer recommends.

You might be interested:  Question: How To Install Michelin Wiper Blades Sienna 2012?

Should all 4 tires have the same PSI?

Tire pressure differences between front and rear is acceptable. Car manufacturers don’t usually set them up that way in most cars, some do – it depends on the car. Car manufacturers don’t usually set them up that way in most cars, some do – it depends on the car.

What is the 4 psi rule?

Let’s look at how to apply the 4psi rule: Use the recommended pressure on your tyre placard as a start point, drive for approximately one hour, stop and check the pressure. If it’s gone up by 4psi then your pressures are spot on. If it has gone up by less than 4psi, then your start pressure was too high.

Leave a Reply

Your email address will not be published. Required fields are marked *