- 1 What is the recommended tire pressure for Michelin tires?
- 2 What is the correct PSI for my tires?
- 3 Is Michelin Primacy MXV4 discontinued?
- 4 What is the difference between Michelin Primacy MXM4 and MXV4?
- 5 Is 40 psi too much for tires?
- 6 Is 35 psi too high?
- 7 Should all 4 tires be the same PSI?
- 8 Why do dealers overinflate tires?
- 9 Is 25 psi too low for tires?
- 10 How long do Michelin Primacy tires last?
- 11 Are Michelin Primacy 4 Tyres any good?
- 12 Which is better Michelin Premier vs primacy?
- 13 Which Michelin tire is the quietest?
- 14 Are Michelin Primacy MXM4 run flat tires?
What is the recommended tire pressure for Michelin tires?
A typical passenger car tire, properly inflated to 35 psi ( pounds per square inch ), can lose up to 1 psi per month under normal driving conditions, according to Michelinman.com. Therefore, you should check your tire’s pressure cold, or before you’ve driven for the day, at least once every month.
What is the correct PSI for my tires?
Air pressure in tires is measured in pounds per square inch, or PSI; usually, the recommended pressure ranges between 30 and 35 PSI. To learn what your tire pressure should be, look for your manufacturer’s recommendation, which is printed on a label inside your car.
Is Michelin Primacy MXV4 discontinued?
Note: Michelin is phasing out the MXV4 and replacing it with the new Premier A/S. The Michelin Primacy MXV4 is one of our top choices in premium all-season touring tires.
What is the difference between Michelin Primacy MXM4 and MXV4?
The MXV4 carries a 60,000 mile tread warranty, while the MXM4 comes with either a 45,000 mile or 55,000 mile warranty depending on speed rating. Which Tire Wins? It would be hard to go wrong with either of these tires. We would say that if wet traction is important to you, the MXM4 makes an excellent choice.
Is 40 psi too much for tires?
Higher pressure generally is not dangerous, as long as you stay well below the “maximum inflation pressure.” That number is listed on each sidewall, and is much higher than your “recommended tire pressure” of 33 psi, Gary. So, in your case, I’d recommend that you put 35 or 36 psi in the tires and just leave it there.
Is 35 psi too high?
Higher pressure generally is not dangerous, as long as you stay well below the “maximum inflation pressure.” That number is listed on each sidewall, and is much higher than your “recommended tire pressure ” of 33 psi, Gary. So, in your case, I’d recommend that you put 35 or 36 psi in the tires and just leave it there.
Should all 4 tires be the same PSI?
Often, the vehicle manufacturers specify more air pressure in the back for this very reason. (Sometimes, not often, they specify a couple of pounds lower in the rear, but rarely more than 2 psi.) A good rule of thumb would be to keep the same variance front to rear that the vehicle manufacturer recommends.
Why do dealers overinflate tires?
Tires are overinflated during the shipping process, so as to help prevent the flat spot from forming in the tire as it sits for days on in during the shipping process. It is supposed to be part of the delivery check process that the service department deflates the tires to the proper pressure.
Is 25 psi too low for tires?
The low tire – pressure warning light will display when the tire’s air pressure is 25 percent below the automaker’s recommended PSI. A 25 percent reduction in tire pressure is considered severe. So take the low – tire pressure warning as the warning it is!
How long do Michelin Primacy tires last?
Ten years is a maximum If the tires haven’t been replaced 10 years after their date of manufacture, as a precaution, Michelin recommends replacing them with new tires. Even if they appear to be in usable condition and have not worn down to the tread wear indicator.
Are Michelin Primacy 4 Tyres any good?
Overall – The Michelin Primacy 4 is a specialist in dry conditions with good dry braking and precise steering and handling. The Primacy 4 loses points in the wet, with weak aquaplaning resistance, but still has good wet braking. Average road noise, but the lowest wear on test.
Which is better Michelin Premier vs primacy?
The good news is that the Premier A/S maintained its wet stopping performance between full tread and 5/32”. Yes, the Primacy performed better, and most tires do on dry pavement. Add water and the Premier comes into its own, revealing what Michelin had in mind in developing the EverGrip technology all along.
Which Michelin tire is the quietest?
Top 10 Best Quietest Tires on the Market Reviews
- #1 Michelin Primacy MXV4 Radial Tire.
- #2 Goodyear Wrangler.
- #3 Hankook Optimo H727 All-Season Tire.
- #4 Goodyear Wrangler DuraTrac Radial.
- #5 Yokohama ENVigor All-Season Tire.
- #6 Michelin Defender All-Season Radial Tire.
- #7 Bridgestone Turanza Serenity Plus Radial Tire.
Are Michelin Primacy MXM4 run flat tires?
The Primacy MXM4 ZP (zero pressure) is engineered for luxury sedan and coupe drivers looking to combine all-weather handling and traction with good noise and ride comfort while providing run flat protection.