FAQ: Why Do Michelin Tires Not Have A P On Size?

Does the P matter in tire size?

Physically, they have about the same dimensions and appear to fit interchangeably, but you will notice a difference in the two- or three-digit number following the size called the load index. The higher the load index, the greater the load-carrying capacity of the tire.

Where is the DOT code on a Michelin tire?

Locate the DOT number. On the sidewall of the tire, locate a number that starts with DOT. It can be up to 12 digits long. The last three or four numbers are the date code.

How do I know my Michelin tire size?

Find your tire size in your vehicle owner’s manual or on your door. Find the information in your vehicle owner’s manual in the glove compartment or on the tire information sticker on your driver’s side door.

What is the red dot on Michelin tires?

The red dot indicates the tire’s high point. Most of the time, a wheel will also have a dot —either a drilled dot or a sticker to indicate its low point. If you have these marks, you should align the red dot with the mark on the wheel. By doing this, you minimize the vibration caused by the high point of the tire.

You might be interested:  Quick Answer: How Much Psi Wouldyouput In A Michelin Tiires If The Are 10 Plight?

Can I use 235 tires instead of 225?

Yesthat size will work 100% perfectly, as it is the exact same diameter as the 225 /75-16. 235 /70-16 is actually a shorter tire.

Can I use 225 tires instead of 215?

The car will be a little bit more resistant to hydroplaning in the rain, and have a little better traction in wet and slick conditions. Unless you’re exploring the limits of the car’s performance, most drivers probably wouldn’t notice a difference between a 225 and a 215, all else being equal.

How do you read a DOT tire date code?

The last four digits of this code tell you when your tire was manufactured. The first two numbers indicate what week of the year it was made (out of 52 weeks per year), and the second two numbers represent the year. For example, 5200 would reveal that a tire was manufactured during the 52nd week of the year 2000.

How do I tell the age of my tires?

To determine the age of your tires, check the last four digits of the U.S. The U.S. Department of Transportation (DOT) number stamped on the tire’s sidewall contains a date code that identifies the age of your tires.

How can you tell how old a TYRE is?

All the information you need to find out the age of your tyres is located on the tyre sidewall. Look for the letters DOT then a number code. This production code will tell you the age of your car tyre: the first pair of numbers are the week of manufacture and the second pair are the year.

You might be interested:  Quick Answer: Where Is Michelin Usa Headquarters?

Why are Michelin tires so expensive?

Michelin tires are typically more expensive than most other popular brands because of their quality, warranty offerings, and the company’s satisfaction guarantee. Tire experts agree that Michelin tires have superior construction and a lower defect rate than the competition.

Are Michelin the best tires?

Over the years, Michelin has built a reputation for using top grade rubber to help deliver exceptional fuel economy in each tire. When it comes to the best tire brands, we chose Michelin as number one for many reasons. It’s often said that truck tires are the backbone of a big tire company.

How tall is a 17 inch tire?

17 INCH TIRES TIRE HEIGHT
225 35 17 23.20
245 35 17 23.75
315 35 17 25.68
335 35 17 26.23

What are the dots on new tires for?

The spots on the sidewall of your tires were specifically placed by the manufacturer to guide the tire installation process. In fact, these colored dots serve a specific purpose in helping the tire technician correctly balance the tire.

What is the yellow dot on new tires?

Weight Method ( Yellow Mark) When performing weight match-mounting, the yellow mark on the tire, indicating the point of lightest weight, should be aligned with the valve stem on the wheel assembly, which represents the heaviest weight point of the wheel assembly.

What do the Coloured dots on Tyres mean?

The yellow dot indicates the lightest part of the tyre sidewall. On a wheel or rim, the heaviest part is generally the valve stem. During fitting the yellow dot is aligned with the valve stem of the wheel. Having the dot and valve stem in alignment means technicians won’t need to use as many balancing weights.

Leave a Reply

Your email address will not be published. Required fields are marked *