How To Tell When Michelin Tire Was Made?

How do you tell when a Michelin tire was manufactured?

The date when a tire was manufactured is located on the sidewall of each tire. Consumers should locate the Department of Transportation or DOT code on the tire that begins with DOT and ends with the week and year of manufacture.

How can you tell when a tire was manufactured?

Remember that the last four digits of the code are the date the tire was manufactured. You can check the first two digits of the DOT code to know the week of the manufacturing. The last two digits will reveal the manufacturing year. For instance, when it was written in 0203, the manufacturing year was 2003.

Where is the manufacture date on a tire?

Tires made in the United States have the DOT serial number located on the inside sidewall near the rim. The letters “DOT” are followed by eight to thirteen letters and/or numbers that identify where the tire was manufactured, tire size and the manufacturer’s code, along with the week and year the tire was manufactured.

You might be interested:  Often asked: What The Most Michelin Stars You Can Have?

How do you read a tire DOT code?

How to find the DOT code?

  1. The first two digits of the code represent the week of production during the year (from 1 to 52).
  2. The second two digits represent the year of manufacture.
  3. If your DOT code is a 3-digit number, it means your tire was produced before 2000.

How old are Michelin tires?

On the sidewall of the tire, locate a number that starts with DOT. It can be up to 12 digits long. The last three or four numbers are the date code.

When should I replace my Michelin tires?

Ten years is a maximum. If the tires haven’t been replaced 10 years after their date of manufacture, as a precaution, Michelin recommends replacing them with new tires. Even if they appear to be in usable condition and have not worn down to the tread wear indicator. This applies to spare tires as well.

How many years do tires last on average?

It may be tentative, but tires do have an expiration date. There is a general consensus that most tires should be inspected, if not replaced, at about six years and should be absolutely be swapped out after 10 years, regardless of how much tread they have left. How do you know how old your tires are?

What is the maximum age of a TYRE?

There is no definitive tyre age limit as to when you should replace your tyres but once your tyres reach 7- 10 years old, you should keep a close eye on their condition and consider replacing them. Tyre ageing is commonly identified by small cracks, known as crazing, which appear in the tyre sidewall.

You might be interested:  Question: What Is Dt In Michelin Defender Dt?

What is the oldest tire you should buy?

though it could have new tread, it is still an old tire. Tire Rack’s recommendation that a tire should be replaced ten years from the date of manufacture or six years from the date it is placed into service applies to spare tires, as well, so if your vehicle is six years old or older, it’s probably…

Does tire manufacture date matter?

Every tire has a birth date —the day it was manufactured —and an expiration date that is six years from that manufacture date. Most automobile manufacturers warn drivers to replace vehicle tires after six years. To wait any longer than that is a gamble with tire integrity and is risky for drivers.

Do tires have manufacture date?

The last four digits of this code tell you when your tire was manufactured. The first two numbers indicate what week of the year it was made (out of 52 weeks per year), and the second two numbers represent the year. For example, 5200 would reveal that a tire was manufactured during the 52nd week of the year 2000.

How do I tell the age of my tires?

To determine the age of your tires, check the last four digits of the U.S. The U.S. Department of Transportation (DOT) number stamped on the tire’s sidewall contains a date code that identifies the age of your tires.

When did they start putting date codes on tires?

Luckily, decoding a tire and determining the tire’s age is a pretty straightforward process, as a standardized 10-digit Tire Identification Number (often called a DOT number) was mandated by the United States Department of Transportation in 1971.

You might be interested:  Readers ask: What Is The Normal Tire Pressure For Michelin Ltx Ms2?

What does the white dot on a tire mean?

The White Dot (Dynamic Balancing Dot ) Regardless of the type of wheel, if there is no red dot, mount the tire with the white dot next to the valve stem. The white dot indicates the overall light dynamic balance point of the tire. In other words, it’s as though the white dot represents a bit lighter in the area of tire.

Leave a Reply

Your email address will not be published. Required fields are marked *