Quick Answer: How To Use A Michelin Tire Gauge?

What is the recommended tire pressure for Michelin tires?

A typical passenger car tire, properly inflated to 35 psi ( pounds per square inch ), can lose up to 1 psi per month under normal driving conditions, according to Michelinman.com. Therefore, you should check your tire’s pressure cold, or before you’ve driven for the day, at least once every month.

How do you know what PSI your tires should be?

To find the correct PSI for your tires, you can either look inside your car door or open your car’s manual and look it up; you can usually find it under “ tire maintenance”. Most cars and trucks will fall between 27 and 35 PSI, unless you’re using a commercial vehicle, because the PSI for those tires varies widely.

Is 40 psi good tire pressure?

Higher pressure generally is not dangerous, as long as you stay well below the “maximum inflation pressure.” That number is listed on each sidewall, and is much higher than your “ recommended tire pressure ” of 33 psi, Gary. So, in your case, I’d recommend that you put 35 or 36 psi in the tires and just leave it there.

You might be interested:  Quick Answer: How To Install Michelin Stealth Xt Wiper Blades On A 2017 Gmc Sierra?

Why is my tire pressure light still on after filling tires?

Quick Tip: If the TPMS warning light comes back on after you’ve filled the tire with air, recheck the tire to make sure it is inflated to the proper air pressure. If the tire air pressure is low, you have an air leak and should have the tire fixed or replaced.

Is 35 psi too high?

Higher pressure generally is not dangerous, as long as you stay well below the “maximum inflation pressure.” That number is listed on each sidewall, and is much higher than your “recommended tire pressure ” of 33 psi, Gary. So, in your case, I’d recommend that you put 35 or 36 psi in the tires and just leave it there.

Is 50 psi a good tire pressure?

Every tire has a rated maximum inflation pressure. Often it will be found in small print around the rim edge of the sidewall. This means that the tire will safely carry up to 1477 lbs. and can be safely inflated up to 300 kPa (Kilopascal) or 50 psi (pounds per square inch).

Is 80 psi too high for tires?

The 80 psi is required if the tire is operating at rated load. You most likely have a load range E tire. I have run load range E tires for years on my 4 Runners at 32 psi front and 30 psi rear. This gives me real even tire wear.

Where can I fill up my tires with air?

Where to Get Free for Your Tires

  1. Regional Gas Station or Grocery Store.
  2. Get a Portable Air Compressor.
  3. Check Your Car Trunk.
  4. Ask Your Friend.
  5. Visit Your Oil Change Location.
  6. Go to a Tire Shop.
  7. Use a Bike Pump.
  8. Live in California or Connecticut.
You might be interested:  Often asked: Which Tire Name Is Michelin Model #42751-mic-575?

Do gas stations have a tire gauge?

All you need is a tire air pressure gauge and a supply of air. You can find a pressure gauge at almost any auto parts store, convenience store or fast station. Most of the time, these gauges are less than $10. Most gas stations have air stands where you can fill up your tires.

How do I check my tire pressure without a gauge?

Push your hand down onto the tire. If the tire feels soft and squishy, the tire pressure is low. If the tire feels rock hard, meaning you are unable to push down on the tire at all, then it is overinflated. If the tire feels too low, pump some air into it while keeping your hand on it.

Is 50 psi too much for tires?

Every tire has a rated maximum inflation pressure. Often it will be found in small print around the rim edge of the sidewall. This means that the tire will safely carry up to 1477 lbs. and can be safely inflated up to 300 kPa (Kilopascal) or 50 psi (pounds per square inch).

Should all 4 tires be the same PSI?

Often, the vehicle manufacturers specify more air pressure in the back for this very reason. (Sometimes, not often, they specify a couple of pounds lower in the rear, but rarely more than 2 psi.) A good rule of thumb would be to keep the same variance front to rear that the vehicle manufacturer recommends.

What the lowest tire pressure you can drive on?

If you have standard passenger tires (ninety percent of vehicles do) the lowest tire pressure you can generally drive with is 20 pounds per square inch ( PSI ). Anything under 20 PSI is considered a flat tire, and puts you at risk for a potentially devastating blowout.

Leave a Reply

Your email address will not be published. Required fields are marked *