Question: How To Read Pirelli Tyres?

How do you read the date code on a Pirelli tire?

“DOT”, followed by a series of numbers and letters with the last four numbers identifying the tire’s age. The last two are the production year, while the first two identify the week in which the tire was made.

How do you read a TYRE mark?

Decoding the sidewall

  1. P: Stands for passenger vehicle.
  2. 215: It is the width (in millimetres) of the tyre from sidewall to sidewall.
  3. 65: Next up is the aspect ratio of the tyre.
  4. R: Of course, it stands for Radial.
  5. 15: Represents the wheel diameter.
  6. 95: This number denotes the load bearing capacity of the tyre.

What does the number in brackets mean on Tyres?

A tyre speed rating indicates the maximum speed a tyre is legally approved for. You will find it at the end of the tyre’s size (the list of numbers on the tyre’s sidewall) always represented by a letter and usually following a number – in the following example the tyre speed rating is “V”.

You might be interested:  Often asked: What Does Mtr Pirelli Stand For On?

What do TYRE symbols mean?

Tyre labels will have three different noise bands – the more waves shown on the symbol, the noisier the tyre is. One wave indicates the best performance, which means that the noise level of the tyre is at least 3 dB below the future legal limit.

How long will Pirelli tires last?

How Long Should a New Set of Tires Last? It may be tentative, but tires do have an expiration date. There is a general consensus that most tires should be inspected, if not replaced, at about six years and should be absolutely be swapped out after 10 years, regardless of how much tread they have left.

Is Pirelli a good TYRE?

Pirelli. Known as one of the three top European tyre makers, Pirelli competes with both Michelin and Continental. Owning the economy tyre brands Courier and Ceat, Pirelli tyres are often as expensive as the top tyre brands Bridgestone and Goodyear. Despite this Pirelli’s array of tyres are highly sought after.

What does R mean on a TYRE?

This letter indicates the type of construction used within the casing of the tyre, which in our example is “R” for Radial construction. Other examples are “B” for Bias-ply or “D” for Diagonal construction. Radial tyres are the most common tyres on the road today.

How do you read a TYRE year?

Remember that the last four digits of the code are the date the tire was manufactured. You can check the first two digits of the DOT code to know the week of the manufacturing. The last two digits will reveal the manufacturing year. For instance, when it was written in 0203, the manufacturing year was 2003.

You might be interested:  What Michelin Tire Is Close To The Pirelli Scorpion?

What does H mean on a TYRE?

H is primarily for sports saloons and coupes. Tyres with larger diameters often also have a higher speed rating because they are intended for use on higher-performance cars so need to be able to handle higher speeds. For most modern cars, the tyre rating is not the same as the maximum speed the vehicle is capable of.

What are the three types of tire construction?

There are three main types: clincher, wired and tubular. Most bicycle tires are clincher and have a bead that presses against the wheel rim. An inner tube provides the air pressure and the contact pressure between bead and wheel rim.

Can I mix V and W rated Tyres?

However, for cars the fitting of a higher speed rating is fine. If you do choose a tyre with a higher speed rating though, we recommend that you match the tyres across the axels, avoiding having different speed ratings fitted on either side of the car. The only exception to this is a winter tyre.

What does R16 mean on a TYRE?

R16 – The diameter of the tyre’s inner rim in inches. 91 – Load Rating of the Tyre. V – Speed Rating. Indicates the maximum speed for the tyre when at full load.

What are the markings on a TYRE?

What do tyre markings mean? 195 – Tyre width expressed in millimetres. 50 – Percentage value indicating the ratio of the tyre sidewall height (the place where the size is marked) to its width. In this case, the value “50” means 50 percent of 195 mm, i.e. 97.5 mm.

Leave a Reply

Your email address will not be published. Required fields are marked *