- 1 How do I find my TYRE number?
- 2 How do you read the date code on a Pirelli tire?
- 3 How do you read a TYRE mark?
- 4 How do you read a tire sidewall code?
- 5 How do I know what rims fit my car?
- 6 What does number on TYRE mean?
- 7 How long should a Pirelli tire last?
- 8 When should I replace my Pirelli tires?
- 9 How old should tires be when you buy them?
- 10 How do you read a TYRE year?
- 11 What are the three types of tire construction?
- 12 What does the last number on a tire mean?
- 13 Can I use 235 tires instead of 225?
- 14 What does V mean on tires?
- 15 What do the numbers and letters mean on a tire?
How do I find my TYRE number?
The size of a tyre is printed onto the side of the tyre – on the area known as the sidewall. When looking for the size, you will see that it is made up of a series of numbers and letters. 55 – Height of the tyre sidewall as a percentage of the width.
How do you read the date code on a Pirelli tire?
“DOT”, followed by a series of numbers and letters with the last four numbers identifying the tire’s age. The last two are the production year, while the first two identify the week in which the tire was made.
How do you read a TYRE mark?
Decoding the sidewall
- P: Stands for passenger vehicle.
- 215: It is the width (in millimetres) of the tyre from sidewall to sidewall.
- 65: Next up is the aspect ratio of the tyre.
- R: Of course, it stands for Radial.
- 15: Represents the wheel diameter.
- 95: This number denotes the load bearing capacity of the tyre.
How do you read a tire sidewall code?
How To Read A Tire Sidewall
- TIRE SIZE.
- P identifies your tire as a Passenger Tire.
- 225 identifies the tire section width, which is the measurement of the tire from sidewall to sidewall in millimeters.
- 50 is the two-figure aspect ratio.
- R indicates the construction used within the tires casing.
How do I know what rims fit my car?
The two easiest ways are to check the sticker plate in your car, it should be located inside the driver side door, or look online for the vehicle specifications for your exact make and model. That should tell you the standard rim size.
What does number on TYRE mean?
The first number is the width of the tyre in millimetres. Therefore, this radial tyre has a width of 205mm. The ’65’ confirms the height shown as a percentage of the full tyre width. The letter ‘R’ depicts the variety of tyre. The number ’16’ is the wheel rim diameter stated in inches.
How long should a Pirelli tire last?
It may be tentative, but tires do have an expiration date. There is a general consensus that most tires should be inspected, if not replaced, at about six years and should be absolutely be swapped out after 10 years, regardless of how much tread they have left.
When should I replace my Pirelli tires?
Pirelli tires have treadwear indicators in the tread grooves, which clearly show when the tread has worn to 2/32” remaining. At this point, your tires must be replaced because they do not meet the federal minimum tread depth and they may be dangerous if left in service.
How old should tires be when you buy them?
… though it could have new tread, it is still an old tire. Tire Rack’s recommendation that a tire should be replaced ten years from the date of manufacture or six years from the date it is placed into service applies to spare tires, as well, so if your vehicle is six years old or older, it’s probably…
How do you read a TYRE year?
Remember that the last four digits of the code are the date the tire was manufactured. You can check the first two digits of the DOT code to know the week of the manufacturing. The last two digits will reveal the manufacturing year. For instance, when it was written in 0203, the manufacturing year was 2003.
What are the three types of tire construction?
There are three main types: clincher, wired and tubular. Most bicycle tires are clincher and have a bead that presses against the wheel rim. An inner tube provides the air pressure and the contact pressure between bead and wheel rim.
What does the last number on a tire mean?
The very last number in the sequence, “15,” is the diameter of the tire. This is an important number—this is the number you’ll refer to when you need to know your tire size! The “15” indicates that this particular tire would fit a rim with a 15-inch diameter.
Can I use 235 tires instead of 225?
Yesthat size will work 100% perfectly, as it is the exact same diameter as the 225/75-16. 235/70-16 is actually a shorter tire.
What does V mean on tires?
Speed Rating V
Once the highest speed rating a tire could have, “V” used to represent a maximum of 149 mph (240 kph) or more. Nowadays, it means 149 mph but no higher.
What do the numbers and letters mean on a tire?
The number is the load rating, or the amount of weight that it can handle. The letter is the speed rating, or the maximum speed the tire is built for. As an example, a tire rated 90R could safely carry 1,323 pounds and travel at 106 mph.